New guy

For all those DF800 issues which do not fit into any of the categories below.
Post Reply
jrylander
Posts: 6
Joined: Thu 23 Jun 11, 16:03
Your Country: Sweden, Stockholm

New guy

Post by jrylander »

Sorry if this is regarded as noise - not my intent :)

Just wanted to say that there's a happy new owner to a Dragonfly 800 from 98 in Stockholm, Sweden now.

The boat is the cruising variant without any modifications, original sails etc. Not at all sure that I will change to bigger sails but time will tell.

Best regards and wishes for a nice summer
/Johan
Dragonfly 800 sw cruising from 1998
Christian
Posts: 182
Joined: Mon 13 Nov 06, 21:55
Your Country: Sweden, Nacka

Welcome

Post by Christian »

Welcome on board!

If you are new to multihullsailing - take it easy in the beginning - there are some differences to "lead" sailing.

And enjoy the possibility of being last in to the night harbor - and still take the best rock!

If you didn't get some "sink-fenders" it is time to make a set now.

/ Christian
jrylander
Posts: 6
Joined: Thu 23 Jun 11, 16:03
Your Country: Sweden, Stockholm

Sink Fenders

Post by jrylander »

Sink fenders :) Between bottom and rock?
Dragonfly 800 sw cruising from 1998
Christian
Posts: 182
Joined: Mon 13 Nov 06, 21:55
Your Country: Sweden, Nacka

Sink-fenders

Post by Christian »

Yes, when mooring broad-side to a smoth rock - you need to protect the ama. Pushing regular fenders under the ama is hard - and they pop up all the time. So fenders made out of thick plastic tube is the trick - fenders that sinks - that is much easier to put in place. And make the fenders with double roops so they are strapped around the ama - and they will still be in place in the morning.

I made mine out of 6 tubes strapped together, If you are interested I can post some photos.

Christian
jrylander
Posts: 6
Joined: Thu 23 Jun 11, 16:03
Your Country: Sweden, Stockholm

Post by jrylander »

Ah! Sounds like a very good idea indeed. Yes please, photos would be very nice - when you have the time.

Best regards
/Johan

ps. Funny that you need to type a subject when responding.. Wonder if it's left blank if I leave it out...
Dragonfly 800 sw cruising from 1998
Christian
Posts: 182
Joined: Mon 13 Nov 06, 21:55
Your Country: Sweden, Nacka

Photos

Post by Christian »

I took a tube made for digging dow electrical cables - about 6 cm thick. Cut in 40 cm length and strapped together through the holes.

If you buy tubes - take a thicker one - I took the one I found in my garage.

/ Christian

Please click on any of the photos to see them enlarged!

Image Image
Henrik
Posts: 6
Joined: Mon 17 Nov 08, 15:02
Your Country: Denmark, Copenhagen

Re: New guy

Post by Henrik »

Welcome on board and congratulation with your new boat.
Do you come to IMM in Stockholm? www.imm2011.com
Henrik
DF 800 SWR 175
jrylander
Posts: 6
Joined: Thu 23 Jun 11, 16:03
Your Country: Sweden, Stockholm

Post by jrylander »

Wow! Thanks for the tip. I _will_ try to make that.

hej/Johan
Dragonfly 800 sw cruising from 1998
Double Horizon
Posts: 440
Joined: Wed 09 May 07, 0:18
Your Country: USA

Re: Photos

Post by Double Horizon »

Christian wrote:I took a tube made for digging dow electrical cables - about 6 cm thick. Cut in 40 cm length and strapped together through the holes.

If you buy tubes - take a thicker one - I took the one I found in my garage.

/ Christian

Please click on any of the photos to see them enlarged!

Image Image
Looks pretty nice until a power boat comes along and makes a wake that bounces your hull against the rock. :( And what about the tide change? Your boat would be much safer anchored out. Take your kayak ashore.
Larry - Former Owner DF-1200
tpaliwoda
Posts: 215
Joined: Fri 03 Nov 06, 3:05
Your Country: USA, Raritan YC, Perth Amboy, New Jersey

Post by tpaliwoda »

Larry - imagine doing that in Long Island Sound? How long would your boat last moored like that.
On a plus, you don't get your feet wet getting off the boat...
Ted Paliwoda
D'Fly 1000 ; HN #1
Nice Tri
Raritan YC, Perth Amboy, NJ, USA
guur
Posts: 7
Joined: Mon 20 Dec 10, 21:09
Your Country: Sweden, Gothenburg

Way to go!

Post by guur »

That is the way to do it! Since the boat is in such shallow water there is little risk of powerboat waves and tidal changes are minor in Sweden.. Mooring like that is one of the biggest pro's with multihull sailing!
Christian
Posts: 182
Joined: Mon 13 Nov 06, 21:55
Your Country: Sweden, Nacka

Mooring in nature

Post by Christian »

Hi friends,

been sailing, so:

Tide in the Baltic is unknown, powerboats is a problem however. So the strategy is to select a small bay where several islands protect the inlet. Or to be in one of these areas where you know that powerboat owners don't dare to go (they are not so good at navigation, or?)

Actually - mooring with sink-fenders handles quite a lot of waves.

The old way has more problems. When you moor in the old way – two ropes to land and anchor in the aft. The boat will swing in the wind, about 30 degrees, and that means the amas will hit the rock… They can be protected by using several ropes and a tight mooring but. Better is to find a nice pointing rock that gives more space for the amas… but that is hard to find.

So mooring by putting one ama on the rock is so much easier.

Image Please click on the photo to see it enlarged!


/ Christian
Post Reply