Water tank lid
Water tank lid
Saw this simple solution on a DF920 in how to check the level in the water tank – transparent plastic lid! With a plastic lid you can see the water level – so simple. Is this standard on DF920? It is not on DF800. So to the rest of you – if you have a wooden lid – replace it with a transparent one – and you can check the water level (and see if there are any ugly things in the tank…)
/ Christian
/ Christian
Water Tank Lid
Water tank lid in my DF920 is indeed clear plastic. When I see muck in the tank, I don't/can/t do anything about it, because would need to undo dozens of screws. I'm going to put a waterproof circular hatch in the plastic lid, so that access will be easier.
Might be an idea to do that initially if you are going to make a clear plastic hatch?
Might be an idea to do that initially if you are going to make a clear plastic hatch?
DF920 Pelican, Swansea
No big deal
It's not a big deal to take off the lid, it IS the access cover.
I've done it several times over the years.
Use a battery powered drill driver. It only takes a few minutes.
You can clean the tank easily that way, reaching the whole inside.
Steve
I've done it several times over the years.
Use a battery powered drill driver. It only takes a few minutes.
You can clean the tank easily that way, reaching the whole inside.
Steve
-
- Posts: 10
- Joined: Wed 08 Jul 20, 20:47
- Your Country: Denmark, Horsens