CAD drawings

For all those DF1000 issues which do not fit into any of the categories below.
Post Reply
Mika Harju
Posts: 218
Joined: Thu 02 Nov 06, 13:19
Your Country: Finland, Turku

CAD drawings

Post by Mika Harju »

I am about to draw AutoCad drawings of the hull and rig at the moment.

I have got only the original User's Manual drawings scanned to PDF format, but their quality is really poor and scaling in X-Y dimensions varies. I have spent hours to make measurements in my DF but it is quite difficult.

I would like to get more information about the dimensions and shapes of the hull, rigging, mast and interior.
Does anyone have better quality drawings (PDF, JPG, DXF, DWG...)[/b]
Mika Harju
DF1000 Racing #8
Jurij13
Posts: 6
Joined: Mon 12 Oct 09, 20:17
Your Country: Oldenburg, Germany

Post by Jurij13 »

Hello Mika,

look here: http://www.dragonfly-1000.de/Dragonfly-1036/Deck.html

Greats Jurij
Dragonfly 35-15 for 10 Years between 2009-2019
Dragonfly 920-123 at 2020
Mika Harju
Posts: 218
Joined: Thu 02 Nov 06, 13:19
Your Country: Finland, Turku

Post by Mika Harju »

Jurij13 wrote:Hello Mika,

look here: http://www.dragonfly-1000.de/Dragonfly-1036/Deck.html

Greats Jurij
Thanks. This helps a lot.
Mika Harju
DF1000 Racing #8
Hans-Joachim
Posts: 2
Joined: Tue 10 May 16, 19:19
Your Country: Germany, Bad Homburg/Hessen

CAD drawing modification

Post by Hans-Joachim »

Helle Mika,

possible to let me have a dwg or dxf file?
Is it possible to use a "normal" trailer for the 1000 in germany?
I mean if the armas complete disassembled (2.5 to 2.55 meter)

thanks
Hans
Mika Harju
Posts: 218
Joined: Thu 02 Nov 06, 13:19
Your Country: Finland, Turku

Re: CAD drawing modification

Post by Mika Harju »

[/quote]
According to my measurements the width of the centre hull is 2745mm so it is too much for trailering. The measured weight of my DF is 3119kg.
There was one Italian DF1000 for sale a couple of years ago with a special trailer equipped with hydraulic system to rotate the hull around the center line to get the width under 2.55m.
I am happy to send those files to you, just tell me your email.
Mika Harju
DF1000 Racing #8
Hans-Joachim
Posts: 2
Joined: Tue 10 May 16, 19:19
Your Country: Germany, Bad Homburg/Hessen

Re: CAD drawing modification

Post by Hans-Joachim »

thanks, pls send me the email to:
06172928681@t-online.de

nice day
Hans
Mika Harju
Posts: 218
Joined: Thu 02 Nov 06, 13:19
Your Country: Finland, Turku

Re: CAD drawing modification

Post by Mika Harju »

Done
Mika Harju
DF1000 Racing #8
Post Reply