DRAGONFLY Trimarans User Forum

To answer my own question - longer ones at the front. At least now I'll know where to look for the answer in teh future !!

Hi Can anyone remind me which way round the lifting cables go - shorter ones on back or front lifting eyes. Thanks

Hi Mal, I'm getting some supports made up to your spec, I've been asked what thickness the box section is that you used - can you let me know

Thanks Chris R

Hi Mal, Can you also send me the details of the supports - its exacly what I've been looking for, as I've always been worried about supporting the boat when taken out of the water.

email cj.rowles@virgin.net

Thanks Chris

Thanks Mal - I had emailed Quorning at the same I put the post on the forum - but received no reply. I'll chase again as this will be most straight forward solution

Hi Roger, Took the rudder blade off today & inspected everything properly. The bottom bearing is just as you described on your boat - looks like a missing bush. With the boat in the water it is quite difficult to accuratly measure up. I don't suppose you haev the measurements of the bush you had...

The plate is certainly there & I think seculy attatched to the hull. I could only inspect it by leaning over the back of the boat & there is quite a lot of growth on the bottom of the rudder plate. I think the play is where the rudder shaft enters the plate. Next weekend I'll probably take t...

My 920 has developed quite a lot of play in the rudder. I thought it was the bolt holding the blade in place that was loose, but it appears to be at the bottom of the rudder shaft. The boat is still in the water & I was hoping to not lift it this winter. Anybody had this problem & if so what...

Hi I'm entering the Round the Island race this year (for fun - I'm not a serious racer) & have been told I need a MOCRA rating. My boat is standard (920 Racing) and I don't know or have many of the measurments asked for (eg forward / aft hull overhangs / mast tube circumferance / sail measuremen...

I have a 920 without a bowsprit, and the price quoted by Quorning seems very high. I'm thinking of getting one made up, but would prefer to measure all the kit on an existing boat. Has anyone got a 920 racing with bowsprit around Hamphire / Dorset that I could take the design / measurements from

This may not be the most exciting from a sailing point of view - but was certainly one of the most memorable times I've had sailing - happened sailing from Dartmouth to Poole on 13th August this year

http://uk.youtube.com/watch?v=Y13r3-xNpjg