DRAGONFLY Trimarans User Forum

at the moment i have a dragon fly 920 extreme, i usually sail during july. this summer i'll sail to sicily, and the next i'll be in tuscany . i'm planning to sell her after this summer, but if i can not do, it will be interesting your idea.

e need to trim a mast can anyone help me ?

which is the tension of diamonds and shrouds

this year I change all the nuts, i found some screw short.....see the picture.

Please click on the photo to see it enlarged!

i change mine, no problem, open your old andersen and put the new, no more than 10 min.

OK THE PROBLEM WAS THE WINDOWS. ONE HAS MORE THAN 3 CM FROM THE METAL AND THE FIBER GLASS OF THE BOAT. THE HOLE WAS TOO BIG


Please click on the photo to see it enlarged!

did you go into the afterpeak till the end. iin my boat i find the upper support of the rudder brake.


Please click on the photo to see it enlarged!

i need to change the old, but i cant find the same type in italy. can someone help me ?
thanks

Can i change the CAP nuts of mine with nylon lock nuts ?

gennaker if you sail in a medium strong wind, code 0 if you sail in a very light condition

i mean the bolts that fix the floating. this pass through an iron plate.

Please click on any of the photos to see them enlarged!

Hello, I noticed that where it joins the wings sometimes there are broken bolts. other time it is easy to lose the nuts . The bolts used by quoring are cap-nut. but they tend to come loose and can break the screw if pulled too . some of you did use self-locking nuts? type hex nut. what do you think ...

i'm build the support but i don't know the mesaure of the hight ov the stand.
can some one help me

i made a pin on a metal bar. I put the metal bar inside into the blade and ifixed it with two wire and some epoxy. If you want to weld the pin, you can do but you need to rebuild a little of the blade with new carbon. i did it but after one month i broke the pin. The most important thing is to check...

ok how to prevent a damage to the main hull, but why the hamas damage the hull ?, it's a wrong project, or a wrong assembly of the float. it will be nice if the quoring can help us.
i,m still waiting for a response from the builders, as i have more information i'll share with you.

thank you,

thank you. I use to sail with my lady, i think a self tail can help us.

did you change ?, i want to do the same but i dont know if there is a problem with the spyhood, non enught space.
did you use the self tailing winch with the sprayhood ?
thanks

i have the same problem. i notice that the right float does not clos well, i try and controll with the boat out of water. The left flot goes down to the main hull so the boat can stand up the floting teflon support. The right does not go so deep and hit the border of the main hull. I asked to quorin...

Problems at the helm. I was off the coast of Corsica, by night, with waves of 1.5 meters, and wind at 20 knots, suddenly the rudder blade raised, i controlled the sheet, but is set to strangle sheets, the pin steel.inserted in the rudder. was broke- Luckily I managed to use the outboard as rudder an...

the same thing happend to the boat i'm going to buy. so i think it will beimportant to advise not to leave the boat folded in a place too small !

it will be possible to have some design or mesaure of them.
i'll try to build one
my mail is
gattinoni@mac.com
thank you

i'll do thank you very much

sorry for my english .. yes i mean the small cabinet you have onthe left side the long one you have in the main cabin, and the small that you have in the bothroom. I find the water inside not over.
The previus owner did the work on the windows. but there is still water.

I found the lockers on the left containing water. From the the bathroom to stern on left side there is water. The others are completely dry The previus owner checked everything, but he did not find ways to infiltrate. The water comes in with plenty of rain or hard upwind. Does anyone have an idea ? ...

ok, im going to buy it, but it is difficult to have information on spare parts. I need the price of the rudder blade, and the water stay. do you know ?
as i'm waiting few days to have only information, what will happen if i need spare parts around i the mediterrean sea ?

aye

Analysis trimaran dragonfly 920 extreme. The boat is in good condition, though the sails and equipment shows its five years. A float is a bit hard to open and squeaks. The rudder is to be replaced, broke the pin that keeps it fixed in the down position. All the hardware has to joints micro traces of...

hi, i hope i'll be the next owner of e df extreme, i'll go this week to see the boat, can some one suggest me the critical things to control ?

thanks roby